Chassis Ground; Gain Control - MB QUART NA2-400.2 Quick Start Installation Manual

4

Chassis Ground

The chassis ground connection
is critical to the performance
location that is close to the
away the paint and use a nut
and bolt if possible.
DO NOT USE AN EXISTING
FACTORY BOLT!
5 Power
Connection
6 Signal Input
Connection
Connect the RCA cables to
the INPUT connectors. The
OUTPUT can be used to
provide input for a second
7

Gain Control

Bare metal
Attach the chassis ground, +12V and remote wire.
It is important to make sure these connections are
very secure.
Turn the GAIN control completely
counter-clockwise to minimum.
Ground - Black
Remote - Blue
+12V - Red
GAIN
MIN MAX