Pioneer XDV-P6 Operation Manual page 27

Playing Video CDs
Searching for a desired scene,
starting playback from a
specified time
You can use the search function to search for
a desired scene by specifying a track, and the
time search function to specify the time on a
disc at which play starts.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! Track search and time search are not possi-
ble when disc playback has been stopped.
1 Move the joystick left or right to select
a desired option.
The selected option is highlighted.
2 Press 0–10 to input the desired number.
For tracks
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
! To select 23, press 2 and 3 in order.
— To jump 10 tracks ahead of the selected
one, press 10.
For time (time search)
! To select 21 minutes 43 seconds, press 2, 1,
4 and 3 in order.
! To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and press
buttons 7, 1, 0 and 0 in order.
— To jump 10 seconds ahead of the se-
lected time, press 10.
# Pressing C cancels the input number.
3 While the input number is displayed,
click the joystick.
This starts playback from the selected scene.
Notes
! Time search is not possible when disc play-
back has been stopped.
! Even without using an information display you
can start playback from a specified track. For
details, refer to Specifying track on page 25.
Selecting repeat range
You can choose between repeat play of a disc
or a track.
1 Move the joystick left or right to select
the repeat range option.
The repeat range option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! Disc – Repeat the current disc
! Track – Repeat just the current track
Notes
! When repeat play of a Video CD disc is se-
lected, a menu may be displayed after play-
back depending on the disc.
! During playback of Video CDs featuring PBC
(playback control), this function cannot be op-
erated.
Selecting audio output
You can switch between stereo and monaural
audio output.
1 Move the joystick left or right to select
the audio option.
The audio option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! L+R – Left and right
! L – Left
! R – Right
Section
07
27
En