Advertisement
SCO-815 can work with backlit buttons.
In the case of frequent overheating of the system, redu-
ce the load (the number of receivers or their power) or
ensure better ventilation.
The control input is galvanically isolated from the power
supply of the dimmer.
Possibility of connecting a separate control voltage, dif-
ferent from the supply voltage.
Terminals 7-8-9 are connected to each other and consti-
tute a common point N.
In some cases, the dimmer and the light source may not
work properly (for example the light may flicker). This
often occurs with a small load on the dimmer and the
solution is usually to increase the load by, for example,
attaching additional bulbs.
The load on the dimmer's output cannot exceed the li-
mit values. Values given for individual lamps in the tech-
nical data in the manual.
- 4 -
Advertisement
