Advertisement
Settings
"S" setting
» ON – switching of the lighting to maximum brightness without
the possibility of dimming;
» MIN-MAX – adjustment of lighting and dimming speed of the
controlled lamp (for R, L, C and LED characteristics);
» ELS (+/-) – adjustment of lighting and dimming speed for ELS
lamps only. Two setting levels: (+) – faster; (-) – slower.
"%" setting
» MIN-MAX – setting of the minimum light level of the control-
led lamps. Especially for ELS lamps, where in the lower ranges
of illumination there may be a flickering effect or no illumi-
nation at all.
Mounting
1. Disconnect the power supply.
2. Place the dimmer on the rail in the switchboard.
3. Power supply to the dimmer: connect phase L to terminal 10;
connect N wire to terminal 8 (7 or 9).
4. Control buttons: connect a single button or a group of parallel
connected buttons between phase L (+) and terminal 1; con-
nect the N or (-) wire to terminal 3.
5. Connect controlled lighting between terminal 12 and N wire.
- 3 -
Advertisement
