Page 1
Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose The SCO-815 universal lighting dimmer allows the brightness of the following light sources to be adjusted: » Incandescent and halogen lamps of the main series (resistive load R);Lamps supplied by a toroidal transformer (inductive...
Page 2
Features » Automatic detection of the nature of the load: R+L, R+C and LED. The use of ESL lamps requires manual setting of the na- ture of the load using the knob on the face of the dimmer; » Smooth brightening and dimming to extend the life of the con- trolled lamp;...
Page 3
Settings "S" setting » ON – switching of the lighting to maximum brightness without the possibility of dimming; » MIN-MAX – adjustment of lighting and dimming speed of the controlled lamp (for R, L, C and LED characteristics); » ELS (+/-) – adjustment of lighting and dimming speed for ELS lamps only.
Page 4
SCO-815 can work with backlit buttons. In the case of frequent overheating of the system, redu- ce the load (the number of receivers or their power) or ensure better ventilation. The control input is galvanically isolated from the power supply of the dimmer.
Page 5
Testing is recommended before final installation. Wiring diagram control input 7-8-9 N power supply L power supply dimmer’s ouput - 5 -...
Page 6
Technical data power supply 195÷265 V AC maximum load current (AC-1) 2 A maximum power of connected light bulbs 500 W 500 W 500 W (ESL) 100 W (LED) 100 W control voltage 9÷230 V AC/DC power consumption 0.1 W terminal 2.5 mm² screw terminals tightening torque 0.4 Nm working temperature...
Need help?
Do you have a question about the SCO-815 and is the answer not in the manual?
Questions and answers