Table of Contents
Advertisement
Throttle Control
The throttle control
(Figure 15
located on the right, rear side of the control panel.
Rotate the throttle to regulate the engine speed.
Figure 16
1. Full speed
Traction and Reel-Drive
Engagement Lever
The traction and reel-drive engagement lever
17) is located on the front right side of the control
panel.
To transport the machine, the lever has 2 positions:
N
and F
EUTRAL
ORWARD
traction—F
(transport) position or the
ORWARD
traction—F
and reel drive—E
ORWARD
engages the traction drive
Note:
To move the lever, you must first engage the
operator-presence control.
and
Figure
16) is
2. Slow speed
(Figure
. Pushing the lever to the
position
NGAGE
(Figure
17).
g027738
1. N
EUTRAL
2. Traction—N
EUTRAL
reel drive—D
To operate the reel, the lever has 2 positions: E
and D
ISENGAGE
left, then forward to the traction—F
reel drive—E
NGAGE
begin mowing. Push the lever to the right to the
traction—F
ORWARD
the reel and continue forward motion or pull back on it
to the traction—N
position to disengage both the reel and the traction
drive
(Figure
17).
Note:
If you release the operator-presence control,
the lever returns to neutral and the machine stops.
13
Figure 17
3. Traction—F
(transport)
and
4. Traction—F
reel drive—E
ISENGAGE
. Move the top of the lever to the
ORWARD
position to engage the reel and
(transport) position to disengage
and reel drive—D
EUTRAL
g000494
ORWARD
and
ORWARD
NGAGE
NGAGE
and
ISENGAGE
Advertisement
Table of Contents
