Understanding Built-In Cd Player Error Messages - Pioneer Super Tuner III DEH-P90HDD Operation Manual

U
nderstanding built-in CD player error messages
When problems occur during CD play, an error message may appear on the display. If an error mes-
sage appears on the display, refer to the table below to see what the problem is and the suggested
method of correcting the problem. If the error cannot be corrected, contact your dealer or your near-
est Pioneer service center.
Display
ERROR- 00, 44
ERROR- 11, 12, 17, 30
ERROR- 11, 12, 17, 30
ERROR- 12, 17
ERROR- 10, 11, 12, 17,
30, A0, B0
ERROR- 23
Can't play
HEAT
No audio
Cause
All tracks are skip tracks.
Dirty disc.
Scratched disc.
Unrecorded disc.
Electrical or mechanical
problem.
The CD format cannot be
played back.
MP3 file cannot be played
back.
CD player overheated.
Nothing has been recorded
or the CD format cannot be
played back.
Remedy
Replace disc.
Clean disc.
Replace disc.
Check the disc.
Turn the car ignition ON and OFF,
or switch to a different source, then
switch back to the CD player.
Replace disc.
Switch to other MP3 file.
Turn off the CD player and wait
until the CD player cools down.
Replace disc.
74