Multi-Cd Player; Display And Indicators; 50-Disc Multi-Cd Player; Basic Operation - Pioneer Super Tuner III DEH-P930 Operation Manual

Multi-CD Player

D
isplay and indicators
FORM 1
q
r
FORM 2
q w e
r
qSource name
wDisc number
eTrack number
rDisc title
tPlay time
yTrack title
50
-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
B
asic operation
This product can control a multi-CD player,
which is sold separately.
1. Press SOURCE to select the multi-CD
player.
Press SOURCE until "Multi-CD" appears.
2. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
19
w e
t
t
y
3. Turn VOLUME to adjust the volume.
4. Press 5 5 or ∞ ∞ to select a disc.
A disc number for which there is no disc will
be skipped.
• You can use the buttons 1 – 6 (or 7 – 12)
to select a disc directly.
5. Press 2 2 or 3 3 to select a track.
Pressing 3 skips to the start of the next
track.
Pressing 2 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold 2 or 3, you can per-
form fast forward or reverse.
Note:
• When the multi-CD player is performing the
preparatory operations, "Ready" is displayed.
• If the multi-CD player cannot operate properly, an
error message such as "ERROR-14" is displayed.
Refer to the multi-CD player owner's manual.
• If there are no discs in the multi-CD player maga-
zine, "No disc" is displayed.
S
electing a disc directly
You can use the buttons 1 – 6 (or 7 – 12) to
select a disc directly.
1. Press NEXT to display "1" – "6" (or "7" –
"12").
Press NEXT until "1" – "6" (or "7" – "12")
appears.
2. Press any of the buttons 1 – 6 (or 7 – 12)
to select a disc located at 1 to 6 (or 7 to
12).
Note:
• You cannot display "7" – "12" when a 6-disc multi-
CD player is connected.