Advertisement
1a. For Wooden Joist Ceiling Mounting
W-A
W-A
Hang the ceiling plate so that the screws
fit into the keyhole openings. Turn the
ceiling plate into place and then tighten
the screws.
• Make sure that mounting screws are anchored into the center of the joist. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
3
55mm
55mm
(2.2")
(2.2")
ø 4.5mm
(ø 3/16")
1
Find and mark
the exact location
of mounting holes
X
WARNING
1b. Solid Brick and Concrete Block Mounting:
1b. For Solid Brick and Concrete Mounting
2
3
Drill two
pilot holes
3mm
3mm
Screw the
ceiling plate
onto the
W-A
ceiling
Hang the ceiling plate so that the screws fit into the keyhole openings. Turn the ceiling plate into place .
Do not tighten screws at this time. Fix the ceiling plate using the two other screws and then tighten all
the screws!
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
W-B
WARNING
60mm
60mm
(2.4")
(2.4")
ø 10mm
(ø 3/8")
1
Mark the exact
location of
mounting
holes
2
Drill four
pilot holes
Screw the
ceiling plate
onto the
ceiling
4
Advertisement
