Remove all packing materials from inside the microwave drawer. Do not remove the
z
waveguide cover, which is located on the top of the microwave drawer (see illustration on
below for waveguide cover location).
Remove the feature sticker, if one is present. Check the drawer for any damage, as a
z
misaligned or bent drawer, damaged drawer seals and sealing surfaces, broken or loose
microwave drawer guides and dents inside the cavity or on the front side of the drawer,
If there is any damage, do not operate the microwave drawer and contact your dealer or
visit www.fisherpaykel.com.
Sealing surface
Waveguide cover
4
SAFETY AND WARNINGS
Sealing surface
Oven cavity