Installing The Switch Using The Nxk-Acc-Kit2-2Ru Rack-Mount Kit - Cisco Nexus 9348D-GX2A Hardware Installation Manual

Installing the Switch using the NXK-ACC-KIT2-2RU Rack-Mount Kit

Installing the Switch using the NXK-ACC-KIT2-2RU Rack-Mount Kit
To install the switch, you must attach inner rails to the chassis, attach the outer rails to the rack, slide the
switch onto the outer rails, and secure the switch to the rack with the retainer screws. Typically, the front of
the rack is the side easiest to access for maintenance.
Before you begin
• You have inspected the switch shipment to ensure that you have everything ordered.
• Make sure that the switch rack-mount kit includes the following parts:
• The rack is installed and secured to its location.
Step 1
Install the two inner rails to the sides of the chassis using flat-head screws, as shown in the following illustration:
Step 2
Install the two outer rails to the front posts of the rack by aligning the rails to the post holes, as shown in the following
illustration:
Cisco Nexus 9348D-GX2A ACI-Mode Switch Hardware Installation Guide
16
• Rack-mount inner rails (2)
• Rack-mount outer rails (2)
• Flat head screws (12)
Installing the Chassis