Connect the Easy Setup mobile app
Search "SmartThings" in the Google Play Store, Galaxy Store, or Apple App Store.
Download the SmartThings app, provided by Samsung Electronics, on your smart
device. You need a Samsung account to use the app.
AP
Connecting
Connection complete
1.
Press and hold (for at least 1 second)
the Power (
) button to turn on the
product and start up the mobile app
(SmartThings).
2.
Press and hold the Pause & Lock (
) key for about 5 seconds. After that,
prepare to connect to the mobile
app. Proceed with the connection by
following the guide displayed on the
mobile app.
•
Continue holding down the Pause &
Lock (
) key even after the "Lock
Settings screen" appears.
3.
Once the device is connected to the
mobile app, "Connecting" will appear
on the screen. (This may take up to a
maximum of 5 minutes depending on
your usage environment.)
4.
Once the connection is complete,
"Successfully connected" will appear on
the screen. You can now monitor your
device's status using the mobile app.
Wi-Fi On/Off Settings
Wi-Fi
Off
Tap OK to turn on
NOTE
Heat) Residual heat" is displayed on the screen, you are unable to set
While "(
the Wi-Fi On/Off for safety reasons.
1.
Press and hold (for at least 1 second)
the Power (
) button to turn on the
product.
2.
Within 10 seconds after the product
turns on, press and hold the Pause &
Lock (
) key for about 3 seconds.
3.
Press and hold the Max Boost (
key on the right for about 3 seconds.
The product's Wi-Fi is enabled.
4.
Press the OK (
) key to set the
Wi-Fi On/Off.
English 25
)