Download Print this page

Ki Mobility Axiom Backs DEX Quick Start Manual

Backrest hardware

Advertisement

Quick Links

Tool Needed:
• 10mm wrench
• tape measure or level
Assemblies Included:
Two sets of
fasteners provided.
Reference Fastener
Key below.
X2
X2
Fastener Key:
Fastener drawings are actual size so hardware
can be compared to drawings.
- 100860
35mm (Used for 1" and 1-1/8" back canes)
- 101824
30mm (Used for 3/4" and 7/8" back canes)
If you have any questions or concerns about any
aspect of this Axiom back, please do not hesitate to
contact us by:
Telephone:
715-254-0991
In Writing at:
Ki Mobility
5201 Woodward Drive
Stevens Point, WI 54481
U.S.A
Or via email at:
sales@kimobility.com
Ki Mobility
5201 Woodward Drive
Stevens Point, Wisconsin 54481
715-254-0991
www.kimobility.com
DEX BACKREST HARDWARE
QUICK START
DCN0478.2
GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the Axiom Backs DEX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ki Mobility Axiom Backs DEX

  • Page 1 Two sets of fasteners provided. Telephone: Reference Fastener 715-254-0991 Key below. In Writing at: Ki Mobility 5201 Woodward Drive Stevens Point, WI 54481 U.S.A Or via email at: sales@kimobility.com DEX BACKREST HARDWARE Fastener Key: Fastener drawings are actual size so hardware can be compared to drawings.
  • Page 2 General Setup (Before Delivery) Fitting Adjustments (User Present) Determine installation slots based on configuration. Loosely assemble the clamps onto the back canes at the desired location talked about in step 3. Bolts should thread inwards from the outside of the chair. Tighten clamp enough WARNING: IT MAY BE POSSIBLE TO ADJUST THE FINAL POSITION so it stays in place and repeat on opposite side.