Intex ULTRA XTR RECTANGULAR POOL Manual page 9

5. SIDE A & B LEGS INSTALLATION (refer to figure 5):
IMPORTANT: Do not fully tighten fasterners until last assembly operation.
6. MAINTENANCE: Regularly check all nuts, bolts, steps and step anchor sleeves to ensure
all parts are secured properly and the ladder is sturdy.
7. BEFORE USE OF LADDER (refer to figure 6):
With all parts now in place, verify that all fasteners/screws are fully tightened and apply
downward pressure to each step to be sure they are fully anchored in place.
IMPORTANT: The removable steps side must be located outside of the pool.
WHEN NOT IN USE, LADDER SHOULD BE KEPT IN SAFETY POSITION.
REMOVE THE FRONT STEPS SIDE WHEN THE POOL IS NOT IN USE OR
OCCUPIED. STORE THE REMOVABLE STEPS SIDE IN A SAFE PLACE
AWAY FROM CHILDREN REACH. CLOSE THE CLASPS BACK.
SAVE THE CARTON FOR STORAGE AND THE INSTRUCTIONS FOR RE-ASSEMBLY
S AVE THESE INSTRUCTIONS
(333IO) 42" LADDER WITH REMOVABLE STEPS ENGLISH 4.875" X 7.25" PANTONE 295U 03/30/2022
LADDER SETUP (continued)
3
2
WARNING
Page 8
17 (M6*35)
1
333
A
5
6