Table of Contents
Advertisement
Indicator
Name
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
On/Blinking
●
Comes on when the CMBS
TM
system shuts itself off.
Explanation
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in
a safe place, and wipe it off with a soft cloth.
2 Front Sensor Camera P. 483
Have your vehicle checked by a dealer if the
●
indicator does not go off even after you
cleaned the camera.
2 Collision Mitigation Braking System
(CMBS
TM
) P. 536
Stays on - The temperature inside the camera is
●
too high. Use the climate control system to cool
down the camera. The system activates when the
temperature inside the camera cools down.
2 Front Sensor Camera P. 483
Indicator may come on temporarily when
●
passing through an enclosed space, such as a
tunnel.
The area around the radar sensor is blocked by
●
dirt, mud, etc. Stop your vehicle in a safe place,
and wipe it off with a soft cloth. Indicator may
take some time to go off after the radar sensor
is cleaned.
●
Have your vehicle checked by a dealer if the
indicator does not go off even after you clean
the sensor cover.
2 Collision Mitigation Braking System
(CMBS
TM
) P. 536
uuIndicatorsu
Message
TM
TM
Continued
95
Advertisement
Chapters
Table of Contents
