uuIndicatorsu
Indicator
Name
Road Departure
Mitigation
(RDM) Indicator
Adaptive Cruise
Control (ACC)
with Low Speed
Follow Indicator
(Amber)
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
92
On/Blinking
●
Comes on when the RDM system
shuts itself off.
Indicator may come on
●
temporarily when the Maximum
Load Limit is exceeded.
Comes on for a few seconds when
●
you turn the ignition switch to ON
*1
, then goes off.
(
w
Comes on if there is a problem
●
with ACC with Low Speed Follow.
Explanation
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off with
a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator and message come back on
after you cleaned the area around the
camera.
2 Front Sensor Camera P. 483
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 455
Stays on constantly - Have your vehicle
●
checked by a dealer.
Comes on while driving - Have your
●
vehicle checked by a dealer.
Message
—