Honda CR-V 2020 Owner's Manual page 570

uuMaintenance Minder
■
Resetting the Display
Reset the Maintenance Minder display if you have performed the maintenance
service.
ENTER Button
(Display/Information) Button
1. Turn the ignition switch to ON
2. Press the (display/information) button repeatedly until the
3. Press the ENTER button.
4. Press and hold the ENTER button for about 10 seconds to enter the reset mode.
5. Press / to select a maintenance item to reset, or to select All Due Items
3 4
(You can also select Cancel to end the process).
6. Press the ENTER button to reset the selected item.
7. Repeat from step 4 for other items you wish to reset.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
568
TM uTo Use Maintenance Minder
*1 .
( w
TM
appears.
1Resetting the Display
NOTICE
Failure to reset the Maintenance Minder
after a maintenance service results in the system
showing incorrect maintenance intervals, which can
lead to serious mechanical problems.
The dealer will reset the Maintenance Minder
display after completing the required maintenance
service. If someone other than a dealer performs
maintenance service, reset the Maintenance
Minder TM display yourself.
Models with Display Audio
You can also reset the Maintenance Minder
using the audio/information screen.
2 How to customize P. 360
Models with color audio system
You can also reset the Maintenance Minder
using the driver information interface.
TM display
TM
TM display
TM display