Honda CR-V 2020 Owner's Manual page 100

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
●
●
●
●
●
●
●
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
98
Condition
Appears when the engine coolant temperature gets
abnormally high.
Appears when you turn the ignition switch to ON
w ( *1 without fastening the driver's seat belt.
Appears when there is a problem with the sensor on
the battery.
Appears if the automatic brake hold is automatically
canceled while it is in operation.
Appears when the automatic brake hold system is
turned off.
Appears when the automatic brake hold button is
pressed without wearing the driver's seat belt.
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
Explanation
2 Overheating P. 627
Fasten the seat belt properly before you start to drive.
●
Have your vehicle checked by a dealer.
●
2 Checking the Battery P. 599
● Immediately depress the brake pedal.
2 Automatic Brake Hold P. 532
Fasten the driver's seat belt.
●
2 Automatic Brake Hold P. 532
Press the automatic brake hold button with the brake
●
pedal depressed.
2 Automatic Brake Hold P. 532