Receive From Usb; Send To Usb - LG 42LY750H-CA Installation Manual

Receive From USB

Once the internal TV data and its channel map information is written to the USB memory card, the user
can start "Receive From USB" process with the data file generated and stored in USB memory card. As
previously warned in "Send To USB" process, the user should not turn TV off nor unplug the USB
memory card. Detailed steps for "Receive From USB" are illustrated below. The following images might
be slightly different than the OSD image .
1
Receive from USB
42LD420C -EU00001 .TLL
Previous
1
Choose a file to be written to
the target TV
2

Send To USB

y Image shown may differ from your TV .
"Send To USB" must be done first before "Receive From USB" process, as it generate the file to be used
in "Send To USB". While writing is in process, the user must not turn TV off nor unplug the USB memo-
ry card. The steps in "Send To USB" are explained below. The following images might be slightly different
than the OSD image .
Plug in USB memory card into the port on target TV .
1
Send To USB
Select the file name and press OK to
start
42LD420C-ZA00001 .TLL
Previous
1
2
Saving 42LD420C-ZA00001 .TLL . . . 87%
The process will be shown with progress
OK
bar, and as soon as teaching the current
profile is finished, a message acknowl-
edging the teaching process is complete
will pop up .
3 TV turns off automatically after completion of
data sending .
2
Saving 42LD420C-ZA00001 .TLL . . . 87%
The process will be shown with progress
OK
bar, and as soon as sending the current
profile is finished, a message acknowl-
edging the learning process is complete
will pop up .
19