Tvlink-Loader; Send To Usb; Receive From Usb - LG MFL62881369 Installation Manual

Lcd tv / led lcd tv
Table of Contents

Advertisement

Installation Menu

TVLink-Loader

You can adjust TVLink-Loader menu by only TVLink Loader which is to be
purchased additionally.
- TV sets for each single hotel rooms, providing 'TVLink-Loader' does maximise installers conve-
nience . By copying all programme settings, picture setting, sound setting, option setting and instal-
lation menu setting . from a set as default and conveying into additional sets, which ensures unifor-
mity between sets and significantly reduces unnecessary installation time via RS232 .
In addition to this, TVLink-Loader enables to load programme for menu installation with wireless
basis .
Image shown may differ from your TV .
y
1
Press the MODE button until the display of TVLink Loader screen changes from "Ready" to "Mode
in".
• Be careful TVLink Loader doesn't move and point the TVLink Loader towards the below center
on the set during this time .
2
Use the UP/ DOWN button to select the TVLink Loader .
3
Press the MODE button in order to change from
TVLink-Loader

Receive from USB

Send to USB

TVLink-Loader
4
Press the SEND or RECEIVE button .
• RECEIVE : RS232 is the main connection for receiving data .
• SEND : For transmitting reserved data can be done by wireless IR Signal or RS232 .
1 . Press SEND button to select "IR Send"(to send data through IR)or "RS Send"(to send data
through RS232)for the download mode .
2 . Press ENTER button to start transmitting .
5
The procedure of Loading will be projected on OSD .
TV Link-Loader
Downloading . . .
Disappearing OSD implies Completion of data receiving or TV turns off automatically after comple-
6
tion of data sending .
* Copy Data item : Programme Data, Installation Menu(excluding the Set ID), Picture, Sound,
Option(Special)
8
Installation Menu (V2 . 2 3)
LG Hotel Mode Setup
TV Link-Loader
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
MCU Version 3 . 1 0
OK
(Refer to
(Refer to
OK
43%
OK
- The other data can be different depending on the chassis .
- Because the Picture Mode: Expert (ISF) Data of the Picture item is charged or the
image quality calibration function by set, it should not be copied .
key to
key and then press the UP button .
in p .13)
1 2
in p .13)
1 2

Advertisement

Table of Contents
loading

Table of Contents