External Speaker - LG 42LY750H-CA Installation Manual

External Speaker

Installation Menu (V2 . 2 3)
LG Hotel Mode Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker external speaker
Network Setup
Pro:Centric
Power Saving
CEC Setup
PreLoadedApp Setup
Media Share
S/W V 02 . 0 3 . 0 0 . 0 1 / MCU V 02 . 0 5 / FPGA V d . 279
1
Use the
(1) Volume control
- Selects the volume control method of an external speaker .
You can select 'Off', 'Int Variable',' Fixed.','Ext Variable', 'Line Output' by pressing◄► button.
Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts .
Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts .
Line output is Fixed line level (typically 400 mVrms ±100 mVrms @10KΩ) output.
Fixed produces a fixed output . The default is Off .
(2) output
- This item is enabled when Volume Control is set to Fixed . You can choose one of 7 steps .(0 .01/0 .03/
0 .05/0 .1/0 .2/0 .5/1 Watts) . The Default is 0 .01 Watt .
(3) Main speaker
- When Off is selected, the main speaker will not work . When On is selected, the main speaker will work .
26
OK
button to select the External Speaker .
External Speaker
Volume Control
Off
◄ ►
Output
0 .01 Watt
Main Speaker
On
Previous
OK