Cisco Nexus 3000 Series Manual page 9

Installing the Chassis
Figure 1: Aligning and Attaching Front-Mount Brackets to the Chassis
1 Front rack-mount bracket
b) Use M4 x 6 mm screws to attach the bracket to the chassis and tighten each screw to 12 in-lb (1.36 N·m) of torque.
c) Repeat Steps 1a and 1b to attach the other front-mount bracket to the other side of the chassis.
Step 2
Align the bottom-support rails so that they form a shelf for the chassis.
Note The bottom-support rails are not interchangeable. Use the one marked with [R] for the right, and with [L]
for the left side of the rack.
2 M4 x 6-mm screws
Installing the Chassis in a Four-Post Rack
Installing the Chassis
9