Re-Fitting Epirb; Refitting Into Bulkhead Bracket - mcmurdo Simrad EG50 Manual

EG50 & EP50

5.9 Re-fitting EPIRB

5.9.1 Refitting into bulkhead bracket

The EPIRB is now in its "ready" state, but its sea switch is still armed
and will activate if it gets wet. To de-activate the EPIRB fully it must
be replaced in its mounting bracket, where a magnet in the bracket will
make the EPIRB safe.
Hold the bracket collar open and drop the EPIRB into the bracket. The
slots in the EPIRB fit over the locating lugs in the bracket.
Hold the collar shut and fit the R-clip to secure the EPIRB. Fold over
the antenna and locate the end moulding in the retaining slot.
30
Fig. 5.10 - EPIRB alignment with bracket
Align
slot
with
lug