Dimplex FD 9405 / L20 Operating Instructions Manual page 32

Wärmepumpenmanager










EN-8
Pre-configuration of all system components for
dynamic menu structuring
Display of information on a running initial heating
program
Which initial heating program is currently running?
Start date of the initial heating
Current step / number of steps required
Current status of the initial heating program
Current return temperature / required return
temperature
Number of hours passed / number of hours required
Which safety element led to the high pressure switch-
off?
Which safety element led to the low pressure switch-
off?
Which block is currently active and since when has it
been active.
Which block is currently active and how long will it
remain active for. This calculation is only possible with
individual blocks, e.g. minimum pause time or switch
cycle block.
Display of a detailed error code for the EvD
Selection of the ventilation level
Display of the current status message for the ventilation
unit
Display of a detailed error code for the ventilation unit
Display of a detailed error code for the ODU
452114.66.71 FD 9405
Setting range Display
Initial heating active
Sensor High-pressure switch
off active
Pressure switch
Flow
ODU
Sensor Low pressure switch-
off active
Pressure switch
Flow
Frost prot. refr.
Block active
Block active
Remaining runtime
can be calculated
HP with EvD
Fault EvD
Ventilation active
ODU HP
L20