Factory Reset; Setup Menu - Philips TAB8405 User Manual

Factory Reset

Reset device to default setting
• In standby mode, press the [ , , vol- ]
buttons on the remote control them in
sequence, the display shows "RESET" to
reset the factory default settings of the host.
• Set is ON, press and hold the
until the display shows "RESET" to reset
the Wi-Fi module to the factory default
settings.

Setup Menu

The unit allows you to configure advanced
settings to provide you with an even better
experience.
1
Press the (MENU) button on the
remote control to open the menu.
2
Select the content with / (Down / Up)
on the remote controller.
Display
Description
Select Equalizer (EQ) E ect
Adjust the Bass Level
Adjust the Treble Level
Set the Audio Delay
Adjust the Center Channel Volume
(TAB8805, TAB8905 only)
Adjust the Top Channel Volume
(TAB8905 only)
Set display brightness
Auto turn off display
Turn On/off the key tone
3
Press (Enter) to confirm your selection.
4
Change the initial values for each of the
settings with the cursors / (Left / Right)
5
Press (Enter) to confirm your
selection.
• To return to the previous screen/ exit the
settings, press
• If no button is pressed within 5 seconds, the
system will automatically exit the menu
EQ
Select predefined sound modes to suit your
video and music: MOVIE, MUSIC, VOICE,
button
STADIUM, CUSTOM.
• MOVIE: Create a surround listening
experience. Ideal for watching movies.
• MUSIC: Create two-channel or multi-
channel stereo sound. Ideal for listening to
music.
• VOICE: Create sound e ect which makes
human voice more clear and outstanding
for listening.
• STADIUM: Create an atmosphere as if
watching a sports game in a stadium.
• CUSTOM: Customize the sound based on
your preferences. Need to be set via the
Fine Tune App.
» By default, the EQ is set to MOVIE.
BASS/TREBLE
Adjust the Bass/Treble Level.
» BAS -5 ~ BAS +5
» TRB -5 ~ TRB +5
» By default, the Bass/Treble is set to 0.
AV SYNC
Set the Audio Delay.
• Video image processing, sometimes longer
than the time required to process the audio
signal. This is called "delayed. " Audio Delay
feature is designed to remedy this delay.
• Set the audio delay, provided only for the
current playback mode. (As provided in the
HDMI ARC audio delay mode, the delay
mode is valid only for the HDMI ARC).
» AV00 ~ AV200
» By default, the audio delay is set to 00.
(Back).
17