Manual Focus - JVC GZ-MG50E Instructions Manual

Hard disk camcorder
Hide thumbs Also See for GZ-MG50E:
Table of Contents

Advertisement

Manual Focus

The camera's Full Range AF system offers
continuous focusing ability from close-up to
infinity. However, the correct focus may not be
obtained depending on the shooting condition.
In this case, use the manual focus mode.
1
Select [AF] in the MSET menu. (
2
If [AUTO] is selected, press
49.
3
Press
to focus on a nearer subject.
(
)
Press
to focus on a further subject.
(
)
When the focus level cannot be adjusted any
further or nearer,
Focusing on a further
subject
pg. 32)
, then press
or
will blink.
Focusing on a nearer
subject
RECORDING FEATURES
To return to automatic focus
Select [AUTO] in step 2.
Manual focus is recommended in situations
listed below:
When two subjects overlap in the same scene.
When illumination is low.*
When the subject has no contrast (difference
in brightness and darkness), such as a flat,
one-colour wall, or a clear, blue sky.*
When a dark object is barely visible in the
display.*
When the scene contains minute patterns or
identical patterns that are regularly repeated.
When the scene is affected by sunbeams or
light reflecting off the surface of a body of
water.
When shooting a scene with a high-contrast
background.
* The following low-contrast warnings appear
blinking:
,
,
, and
33
EN
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents