Beko BDFT710442MB User Manual page 31

Selection of 40 °C temperature and cup-
board dry in the Eco 40-60 programme is a
washing and drying cycle test programme
as per EU/2019/2014 EU regulation and
EN 62512.
***** : These programmes can be used with
the HomeWhiz application. Energy con-
sumption may increase due to connection.
- : See the programme description for max-
imum load.
Please read Installation section of
the manual before first use.
The auxiliary functions in the table
may vary according to the model of
your machine.
Water and energy consumption
may vary subject to the changes in
water pressure, water hardness
and temperature, ambient temper-
ature, type and amount of laundry,
selection of auxiliary functions and
spin speed, and changes in electric
voltage.
Selection patterns for auxiliary
functions can be changed by the
manufacturer company. New selec-
tion patterns can be added or re-
moved.
The spin speed of your machine
may vary according to the pro-
gramme; this spin speed cannot ex-
ceed the max. spin speed of your
machine.
The amount of noise and humidity
varies according to the spin speed;
when the higher spin speed is se-
lected during the spinning phase,
the laundry contains less moisture
but higher noise occurs at the end
of the programme.
You can see the washing duration
on the display of your machine
while selecting a programme. De-
pending on the amount of laundry
you have loaded into your machine,
there may be a difference of 1-1.5
hours between the duration shown
on the display and the actual dura-
tion of the wash cycle. Duration will
be automatically updated soon after
the washing starts.
Always select the lowest appropri-
ate temperature. The most efficient
programmes in terms of energy
consumption are generally those
that wash at low temperatures for a
long time.
EN / 31