Beko BDFT710442MB User Manual page 10

• If the laundry has been
washed with a stain remover,
run an additional rinsing speed
before starting the drying
speed.
• Do not dry leather laundry and
laundry containing leather
(such as leather tags on jeans)
in the machine. The colour left
by the leather parts may smear
on other textiles.
• If there is a problem that you
cannot solve using the inform-
ation given in the safety in-
structions section, turn off and
unplug the machine and call
an Authorized Service.
• In your washer-dryer, you can
only wash laundry, only dry
laundry or do both of these
processes. The machine
should not be used for a long
period of time only for drying
wet laundry. While the ma-
chine is only used for drying, it
should be run empty in a short
washing programme every 15
starts.
• Before putting laundry in the
machine, check all of them and
make sure that there is no ob-
ject such as lighter, coin, metal
object and pin, etc. in their
pockets or inside of them.
• Lingerie that has metal parts
should not be dried in the ma-
chine. Metal parts may come
off during drying and cause
damage to the machine. Put
them in a bag or pillow case.
• Do not dry large laundry such
as tulle curtains, curtains,
sheets/beddings, blankets,
rugs in the machine. Laundry
may get damaged.
• Do not dry unwashed laundry
in the machine.
• Do not use softener or anti-
static agent unless recommen-
ded by the manufacturer.
• Products such as softener
should be used in accordance
with the manufacturer's in-
structions.
• Do not dry silk, wool and sim-
ilar delicate clothes in the ma-
chine. Otherwise, wool clothes
can shrink and damage may
be caused in other delicate
clothes.
• Check the symbols on laundry
label before washing and dry-
ing processes.
• The machine automatically
cleans the lint itself that comes
out of the laundry during dry-
ing. The machine performs
automatic water intakes for
cleaning. For this reason, the
water tap of the machine
should also be open during
drying programmes.
• Prevent the lint from accumu-
lating around the product.
EN / 10