Advertisement
Maintenance and Servicing
procedures not specifically explained in this manual
must be performed only by a qualified technician.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
Make sure that the power Switch/trigger is in the off-position and remove
Battery pack before performing any procedure in this section.
tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:
Do not use damaged equipment. if abnormal noise or vibration occurs,
have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFOrE EacH uSE, inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. aFtEr EVEry uSE, clean the Fogger:
a. Open the Cap on the Tank and drain the
contents into the original container or
a suitable replacement container. Do
not store chemicals in the Tank.
container
Page 8
tank
cap
For technical questions, please call 1-888-866-5797.
note: Dispose of chemicals properly
according to manufacturer guidelines and
all local, state, and federal regulations.
b. Fill the Tank one-third full with clean water.
Install Battery Pack, point Fogger in safe
direction and run Fogger until Tank is empty.
c. Repeat previous step as necessary until Fogger
(and its internal filter) are clean. Disconnect
Battery Pack and drain the Tank of residual water.
d. Allow tool to air-dry with the Tank open.
Once completely dry, reinstall the Cap.
3. Wipe external surfaces of the tool with clean cloth.
4. When dry, store Battery Pack, Charger,
and tool in dry, indoor area out of reach
of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
5. Li-ion BattEry MuSt BE rEcycLED Or
DiSpOSED OF prOpErLy.
Do not short, incinerate or open battery.
Item 59565
Advertisement
