Advertisement
Operating instructions
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Filling the tank
WarninG! tO prEVEnt SEriOuS inJury:
remove the Battery pack from the Fogger
prior to filling the tank. Do not allow any
corrosive or conductive fluids to get inside
the Battery pack. Wipe up any spills before
inserting the Battery pack into the Fogger.
always follow the chemical manufacturer's
instructions printed on their product label.
1. Remove the Cap from the Tank, and place
a Funnel in the neck of the Tank.
2. Fill the Tank with the desired chemical and water
solution directly into the Tank (up to 1/2 Gallon
/ 2 liters), or you may use a premixed solution
from a separate container. The chemical / water
solution must meet the following conditions:
a. The chemical / water solution must be
as thin as water; thicker solutions will
not spray properly from the Fogger.
b. Do not overfill the Tank. The Fogger will
not operate properly if the Tank is overfilled
(do not exceed the max fill line).
Page 6
For technical questions, please call 1-888-866-5797.
Funnel
cap
3. Replace the Cap onto the Tank and tighten securely.
4. Reinstall the Battery Pack.
note: Be sure to thoroughly clean the Funnel,
measuring cup, or any other container used
to mix the chemical / water solution.
tank
Item 59565
Advertisement
