Advertisement
Setup - Before use:
read the EntirE iMpOrtant SaFEty inStructiOnS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
Make sure that the power Switch/trigger is in the off-position and remove the
Battery pack before performing any procedure in this section.
note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page10.
charging Battery pack
Charge Battery after unpacking and before using this tool. Follow instructions included with battery charger (sold
separately)
attaching the Shoulder Strap
1. Attach the spring loaded Clips on either
end of the Shoulder Strap to the Front and
Rear Attachment points on the Fogger.
2. Use the Slide Buckle to adjust the Shoulder
Strap to the desired length that will position the
Fogger in the most ideal ergonomic position for
the operator. Slide the cushion on the Shoulder
Strap to allow it to rest on your shoulder.
Functions
nozzle
Item 59565
On/Off
Switch
Flow control
Knob
cap
For technical questions, please call 1-888-866-5797.
Shoulder
Strap
clip
Front
attachment
trigger
tank
Slide
Shoulder
Buckle
Strap
clip
rear
attachment
Battery
compartment
Battery
Latch
Battery pack
(sold separately)
Page 5
Advertisement
