Specifications - DeWalt DCD1623 Instruction Manual

Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by a
D WALT factory service center or a D
e
service center. Always use identical replacement parts

SPECIFICATIONS

DCD1623
Cutter Size
9/16"–5/8"
11/16"–13/16"
13/16"–15/16"
1"–1‑3/16"
1‑1/4"–1‑3/8"
1‑7/16"–1‑9/16"
1‑5/8"–1‑3/4"
1‑13/16"–2"
For 1‑1/2" diameter or thicker than 1" and above use a 9Ah pack.
WALT authorized
e
20V Max*
Speed (RPM) and Drill Settings (with DCB609G)
Mild Steel
600–1000 RPM
High Gear, Speed 3–5
480–800 RPM
High Gear, Speed 3–5
400–660 RPM
High Gear, Speed 3–4
320–530 RPM
Low Gear, Speed 4–5
270–460 RPM
Low Gear, Speed 4–5
230–400 RPM
Low Gear, Speed 3–4
210–320 RPM
Low Gear, Speed 3–4
190–320 RPM
Low Gear, Speed 2–3
ENGlIsh
Iron Plate
800–1200 RPM
High Gear, Speed 3–5
640–960 RPM
High Gear, Speed 3–5
530–800 RPM
High Gear, Speed 3–5
420–640 RPM
High Gear, Speed 3–4
360–550 RPM
Low Gear, Speed 4–5
320–480 RPM
Low Gear, Speed 4–5
280–420 RPM
Low Gear, Speed 3–5
260–380 RPM
Low Gear, Speed 3–4
37