Philips D600 Short User Manual page 6

Enjoy
4
Phonebook
Add record
1 Press > [Option] > [Add new].
2 Follow on-screen instructions.
Call from the phonebook
1 Press
.
2 Select a record and press
.
Direct access memory
You have 9 direct access memories (Keys 1 to 9). To
dial the saved phone number automatically, press and
hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are preset
to [1_voicemail] (voice mail number) and [2_info
svc] (information service number) of your network
operator respectively (network dependent).
Call log
Call from the call log
1 Press .
2 Select [Incoming calls] (for D605 only).
3 Select a record and press .
Add record
1 Press > [Incoming calls] (for D605 only) >
[Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press > [Incoming calls] (for D605 only) >
[Option] > [Delete].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press [Redial].
2 Select a record and press .
Add record
1 Press [Redial] > [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press [Redial] > [Option] > [Delete].
2 Follow on-screen instructions.
Record an announcement
(for D605 only)
1 Select [Menu] > > [Announcement].
2 Follow on-screen instructions.
Register additional handsets
You can register additional handsets to the base
station.
1 Select [Menu] > > [Register], then press
[OK] to confirm.
2 Press and hold
on the base station for 5
seconds.
3 Enter the system PIN/passcode (0000).
4 Press [OK] to confirm the PIN/passcode.
Registration is complete in less than 2 minutes.
»
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Select [Menu] > > [Reset], then press
[OK] to confirm.
2 Follow on-screen instructions.