Beko WDTE9746X User Manual page 23

Table of Contents

Advertisement

5.7 Spin speed selection
Whenever a new programme is
selected, the spin speed recommended
for the selected programme appears
on the Spin Speed indicator.
C
INFORMATION
• It is possible that the recommended spin
speed is not the highest value that can
be selected for the relevant programme.
Press the Spin Speed Adjustment
button to change the spin speed.
Spin speed decreases gradually.
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display.
C
INFORMATION
• Spin Speed Adjustment button works
only backwards. For example, if the
display shows 800 rpm but you want
to select 1000 rpm, you will need to
press the button for a few times until
you reach 1000 rpm from 800 rpm.
5.7.1 If you want to spin your laundry
after the Rinse Hold function:
- Adjust the Spin Speed.
- Press the Start/Pause button.
Programme will resume. The machine will
drain the water and spin the clothes.
If you want to drain the water at the end
of the programme without spinning,
you can use the No Spin function.
C
INFORMATION
• If you press the Spin Speed adjustment
button in programmes where the spin
speed is not allowed, the spin speed setting
will not change and you will hear a warning.
23 / EN
-
-
-
-
-
-
You can also change the spin speed after
the washing cycle has started. After the
washing cycle has ended, you can press
the spin speed adjustment button to select
a spin speed. However, you need to do
this before the spinning step begins.
5.7.2 Auxiliary function
selection for drying
When you select a new washing
programme, press the Auxiliary Function
Selection button to set the drying
option suitable for this programme.
C
INFORMATION
• If you press the Drying auxiliary function
button in programmes where the drying
step is not allowed, the drying light will
not change and you will hear a warning.
C
INFORMATION
• Only for dying programmes, press the
Auxiliary Function Selection button
to set the suitable drying option.
5.8 Drying programmes
A
CAUTION!
• During the drying programme, the
machine automatically removes the lints
coming from the clothes. The machine
uses water in the drying step. For this
reason, water tap of the machine should
be open also in the drying programmes.
• When you select a new washing
programme, press the Auxiliary Function
Selection button to set the drying
option suitable for this programme.
-
-
-
-
Washer-Dryer / User's Manual

Advertisement

Table of Contents
loading

Table of Contents