Table of Contents
Advertisement
5. GENERAL INFORMATION
BOILER PUMP
The boiler pump will operate briefly as a self-check once every
24 hours, regardless of system demand.
MINIMUM CLEARANCES
1
Clearance of 165mm (6
(9
/
") at the sides and 450mm (17
1
8
casing must be allowed for servicing.
BOTTOM CLEARANCE
Bottom clearance after installation can be reduced to 5mm
This must be obtained with an easily removable panel, to enable
the system pressure gauge to be visible and to provide the
100mm clearance required for servicing.
SERVICE REQUEST FUNCTION
When the boiler has been installed for more than 1 year the following
message will appear on screen:
Press "Restart" to clear this message.
/
") above, 100mm (4") below, 2.5mm
2
/
") at the front of the boiler
3
4
ESCAPE OF GAS
Should a gas leak or fault be suspected contact the National Gas
Emergency Service without delay. Telephone 0800 111 999.
Ensure that;
- All naked flames are extinguished
- Do not operate electrical switches
- Open all windows and doors
CLEANING
For normal cleaning simply dust with a dry cloth. To remove stubborn
marks and stains, wipe with a damp cloth and finish off with a dry
cloth. DO NOT use abrasive cleaning materials.
MAINTENANCE
The appliance should be serviced at least once a year by a Gas
Safe Registered Engineer or in IE a Registered Gas Installer
(RGII).
9
Advertisement
Table of Contents
