Advertisement
Operating Instructions
Full-automatic programming
This function is used to start cooking after a certain period of time and for a certain duration. A time of up to
10 hours after the current time of day can be set. Prepare the food for cooking and put it in the oven.
The operating time will be calculated and the oven will automatically start so that cooking will finish at the
set finishing time. When the timer reaches zero, the oven will switch off, an audible warning will sound and
the symbol "A" will flash. Turn both control knobs to the "0" position and press any key to stop the sound.
The symbol will disappear and the timer will switch back to manual function.
Sound Adjustment
To adjust the volume of the audible warning sound, press the MODE button three times while the signal is
sounding. The oven function selector knob must be at the "0" position. "L3" will appear on the display
screen. Press the "+" and "-" buttons to adjust the sound level. Release the buttons and, after a few
seconds, the signal sound volume will be set.
1
Select the desired cooking function.
Press MODE until you see "dur" on the screen. The symbol "A" will
2
flash.
Select the desired cooking time period using the "+" and "-" buttons.
3
The current time will reappear on the screen and the symbols "A" and
4
will remain illuminated.
Press MODE until you see "end" on the screen. The symbol "A" and
5
the current time of day will flash.
Select the desired finishing time using the "+" and "-" buttons.
6
7
Add the cooking period to the current time of day. You can set a time of
up to 23 hours and 59 minutes after this.
The current time will reappear on the screen, and the symbols "A" and
8
will remain illuminated.
9
Advertisement
