Advertisement
Instructions
1. Install battery by removing screw(s) and opening battery compartment. Install
SR44 battery in correct polarity, close compartment and replace screw(s).
2. Push the OFF ON button to turn caliper on.
3. To toggle measurement between inches and millimeters, press in/mm button.
4. With jaws closed, press ZERO to set readout to 0.
5. To measure outside of object, set the bottom prongs outside object being measured.
Slide the jaws together until they gently contact the item.
6. To measure inside of object, set the top prongs inside object being measured.
Spread prongs apart until they touch surface of object.
7. When finished, press OFF ON to turn off Caliper.
Outside Measurement
Depth Measurement
Page 6
in/mm
in/mm
mm
mm
OFF
OFF
ON
ON
ZERO
ZERO
For technical questions, please call 1-888-866-5797.
in/mm
in/mm
OFF
OFF
ON
ON
Inside Measurement
Step Measurement
mm
mm
ZERO
ZERO
in/mm
in/mm
mm
mm
OFF
OFF
ON
ON
ZERO
ZERO
63711
Advertisement
