Symbols In This Manual - Ryobi RLM4018 Original Instructions Manual

Beware of sharp blades.
Blades continue to rotate
after the motor is switched
off – Remove plug from mains
before maintenance or if cord is
damaged.
Beware of thrown or fl ying
objects. Keep all bystanders,
especially children and pets,
at least 15m away from the
operating area.
Keep the supply fl exible cord
away from the cutting blades.
Press the Start button and then
the On-off button (A or B) to
start the product. Release the
Start button and keep pressing
the On-off button to run the
product. Release the On-off
button to stop the product.
Go
Stop
Class II tool, double insulation
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.
Conforms to all regulatory
standards in the country in
the EU where the product is
purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
The guaranteed sound power
level is shown on this label by
95 dB.
6 | English
The following signal words and meanings
are intended to explain the levels of risk
associated with this product:
DANGER
Indicates an imminently hazardous situation,
which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation,
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation,
which, if not avoided, may result in minor or
moderate injury.
CAUTION
(Without safety alert symbol) Indicates a
situation that may result in property damage.

SYMBOLS IN THIS MANUAL

Connect to power outlet.
Disconnect from power outlet.
Parts or accessories sold
separately
Keep hands away from blades
Note
Warning
Stop the product.