Table of Contents
Advertisement
3. Getting Started
The default settings of the wireless router may need change so as to meet your individual needs.
Therefore, before using the ASUS Wireless Router, check the basic settings to make sure they all
work in your environment.
Note:
setup problems due to wireless uncertainty.
1) Wired Connection
ired Connection
The ASUS RT-N11 Wireless Router is supplied with an Ethernet cable in the package. Since
the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use either
straight-through or crossover cable for wired connection. Plug one end of the cable to the LAN
port on the rear panel of the router and the other end to the Ethernet port on your PC.
2) Wireless Connection
For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer
to your wireless adapter user manual for wireless connection procedures. By default, the
SSID of ASUS Wireless Router is "default" (in lower case), encryption is disabled and open
system authentication is used.
3) Setting IP Address for Wired or Wireless Connection
To access RT-N11 Wireless Router, you must have correct TCP/IP settings on your wired or
wireless clients. Set the IP addresses of the clients within the same subnet of RT-N11.
Getting IP address Automatically
The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your
PC get IP address automatically from the ASUS Wirelesss Router.
Note: Before rebooting your PC, switch ON the
wireless router and make sure the router is in ready
state.
Setting up IP address Manually
To set IP address manually, you need to know the default
settings of the ASUS Wireless Router:
• IP address 192.168.1.1
• Subnet Mask 255.255.255.0
e3188_WL520GU_GC_Manual.indd 7
RT-N11 EZ Wireless N Router User Manual
Refer
5
5/22/08 2:50:21 PM
Advertisement
Table of Contents
