Chapter -7: Switching On The Machine And Selecting A Programme - Sharp QW-D21I492X-EN User Manual

CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
1.) Power On/Off Button
When the power on/off button is pressed, start /pause is lit.
2.) Programme Selection Button
With the programme selection button, you can select a suitable program for your dishes.
3.) Delay Timer Button
Thanks to the delay feature of your machine, you can delay the start time of the program for 3-6-9 hours by
pressing the Delay button.
When you press the Delay button, the 3h led comes on. If you continue pressing the Delay button, 6h-9h leds
will come on respectively on each press. When you select the delay time and the desired program,after closing
the door the program with delay will be activated.. If you want you can firstly choose the programme and then. If
you want to change or cancel the delay time, you can adjust by pressing the Delay timer button.
When you delay a program, you can check the remaining time from the display. For example; when you select
9h delay time, 9h delay led comes on. When remaining time is down to 6h, then the 6h led comes on. In this
way, you can follow up the remaining time.
Note 1: (only models with extra features): If you have used an extra feature on the latest washing program,
this feature will remain also on the next washing program. If you do not want to use this feature on the newly
selected washing program, press the selected feature button again, and check that the lamp on the button goes
off.
4.) Salt Lack Warning Indicator
In order to see whether softening salt in your machine is sufficient or not, check the salt lack warning light on the
display. When the salt lack warning comes on, you need to fill the salt chamber.
Rinse aid Lack Warning Indicator
In order to check that there is sufficient rinse aid in your machine check the rinse aid lack warning light on the
display. When rinse aid lack warning light starts coming on, fill the rinse aid chamber.
End of Program Indicator
The end of program indicator on the control panel turns on when the selected washing program is completed
.Your machine also gives a buzzer sound for "5 times" when the program is completed.
EN-18