Dell P112F Service Manual page 60

2. Remove the SD card.
3. Remove the base cover.
4. Remove the WLAN card.
5. Remove the display assembly.
6. Remove the hinge caps.
7. Remove the display bezel.
About this task
The following images indicate the location of the hinge caps and provides a visual representation of the installation procedure.
Steps
1. Remove the three (M2.5x3.8) from the left hinge.
2. Lift and remove the left hinge from the display assembly.
3. Remove the three (M2.5x3.8) from the right hinge.
4. Lift and remove the right hinge from the display assembly.
60 Removing and installing components