Fan; Removing The Fan - Dell P112F Service Manual

Steps
1. Place the heat sink on the system board.
2. Tighten the four captive screws that secure the heat sink to the system board.
NOTE: Tighten the captive screws in the sequential order mentioned on the heat sink [1 > 2 > 3 > 4].
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Fan

Removing the fan

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
About this task
The following images indicate the location of the fan and provides a visual representation of the removal procedure.
42 Removing and installing components
After working inside your
Before working inside your
computer.
computer.