Operating The Mower Blade-Control Switch (Pto); Operating The Throttle; Operating The Choke - Toro TimeCutter 75748 Operator's Manual

Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Figure 13
Note:
Always engage the blades with the throttle in
the F position (Figure
AST
Figure 14
Disengaging the Blade-Control
Switch (PTO)
Figure 15
14).

Operating the Throttle

You can move the throttle control between the F
and S positions
LOW
Always use the F
g008945

Operating the Choke

Use the choke to start a cold engine.
1. Push the throttle/choke control past the F
position detent and into the C
engage the choke before using the key switch.
g296056
2. Move the control out of the C
to disengage the choke after the engine has
started.
g009174
17
(Figure 16).
position when engaging the PTO.
AST
Figure 16
HOKE
Figure 17
HOKE
AST
g296056
AST
position to
g369269
position