MSI H270 GAMING PRO CARBON Manual page 96

Removing a RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID drives
will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key to
select a RAID volume for deletion. Then press Delete key to delete the selected RAID
volume. The following screen appears.
Name
Volume0
Press Y key to accept the volume deletion.
Resetting Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter
to delete the RAID volume and remove any RAID structures from the drives. Use the
Space key to select the disks and press Enter key. A confirmation sentence will appear
below, and then press Y key to accept the selection
RAID Volumes :
None defined.
Physical Devices :
Port Device Model
1
2
96
RAID Configuration (optional)
[ DELETE VOLUME MENU
Level
RAID1(Mirror) 2
[
DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete "Volume0"? (Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING :
(This does not apply to Recovery volumes)
[ ↑↓] - Select [ESC] - Previous Menu
1. Create RAID Volume
2. Delete RAID Volume
Resetting RAID disk will remove its RAID structures and revert it
to a non-RAID disk. [ DISK / VOLUME INFORMATION
WARNING : Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model Serial #
1 XXXX-XXXXXXXX
Serial #
2 XXXX-XXXXXXXX
XXXX-XXXXXXXX XXXXXXXXXXXXXX
XXXX-XXXXXXXX XXXXXXXXXXXXXX
Select the disks that should be reset.
[ ↑↓] - Previous/ Next [SPACE] - Selects
[ ↑↓] - Select [ESC] - Exit
]
Drives Capacity Status Bootable
XXX.XGB Normal
]
HELP
[ ]
ALL DISK DATA WILL BE DELETED.
[DEL] - Delete Volume
MAIN MENU
[ ]
4. Recovery Volume Options
[ 4. ] Recovery Volume Options
RESET RAID DATA
5. Exit
]
Size Status
XXXXXXXXXXXXXX XXX.XGB Member Disk
Size Type/Status (Vol ID)
XXXXXXXXXXXXXX XXX.XGB Member Disk
XXX.XGB Non-RAID Disk
XXX.XGB Non-RAID Disk
[ENTER] - Selection Complete
[ENTER] - Select Menu
Yes