Table of Contents
Advertisement
Option Buttons - Advanced
When click the Advanced button, The Voltage, Fan and DRAM icons will appear.
Voltage - allows you to adjust advanced voltage values of CPU and chipset.
y
Fan - allows you to control the system fans speed.
y
DRAM - shows the current Advanced DRAM parameters, and allows you to change
y
the settings by selecting values from the drop-down menu on the right hand side.
Sensor - allows you to monitor your motherboard temperature and fan speed with
y
the virtual thermal image. You can drag and drop the fan icons to new locations.
When you press the Cooling button, all fans will run at full speed.
Option Buttons - Setting
When click the Setting button, The Record, Warning and Mobile Control icons will
appear.
Record - allows you to monitor the status of voltage, fan speed and temperature in
y
real time.
To filter record charts, select the check box next to the items.
ƒ
When click the Play button, the chart pane will start to show the recording chart.
ƒ
If you want to check the value of a specific spot on chart, please move the orange
vertical line to the spot.
History Record stores the data and names with date and time.
ƒ
To make a history record: Select items and click the Record button. When finished,
ƒ
click the Record button again. The data will be stored in the drop-down menu.
To load a record, click the drop-down menu and select one from the list.
ƒ
To delete a record, select the record that you want to delete, and click the Trash
ƒ
Can icon.
Warning - contains fields of voltage, fan speed and temperature for you to set the
y
threshold values. When system detects the status over your settings, a warning
message will pop-up.
Mobile Control - is only available for the motherboard with the built-in WiFi module.
y
It allows you to enable/disable the COMMAND CENTER Remote Server. Please refer
to the instruction on the Mobile Control control panel.
Software Description
71
Advertisement
Table of Contents
