System And Setup Password; Assigning A System Setup Password - Dell XPS 15 9530 Service Manual

Table 18. System setup options—SupportAssist menu
SupportAssist
Dell Auto OS Recovery Threshold
SupportAssist OS Recovery
BIOSConnect

System and setup password

Table 19. System and setup password
Password type
System password
Setup password
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data that is stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.

Assigning a system setup password

Prerequisites
You can assign a new System or Admin Password only when the status is in Not Set.
About this task
To enter the system setup, press F12 immediately after a power-on or reboot.
Steps
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
● A password can have up to 32 characters.
● At least one special character: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
● Numbers 0 through 9.
● Upper case letters from A to Z.
● Lower case letters from a to z.
3. Type the system password that you entered earlier in the Confirm new password field and click OK.
4. Press Esc and save the changes as prompted by the pop-up message.
64 System setup
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.
Default: 2.
Enables or disables the boot flow for SupportAssist operating system Recovery
tool in the even of certain system errors.
Default: ON
Enables or disables cloud Service OS recover if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option.
Default: ON
Description
Password that you must enter to log in to your system.
Password that you must enter to access and make changes to
the BIOS settings of your computer.