Dell XPS 15 9530 Service Manual page 61

Hide thumbs Also See for XPS 15 9530:
Table of Contents

Advertisement

Table 12. System setup options—Power Management menu
Power Management
Wake on AC
Wake on Dell USB Type-C Dock
Auto On Time
Block Sleep
Battery Charge Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Wireless Radio Control
Control WLAN radio
Wake on LAN
Intel Speed Shift Technology
Lid Switch
Power On Lid Open
Table 13. System setup options—Wireless menu
Wireless
Wireless Device Enable
Enables the computer to turn on and go to boot when AC power is supplied to
the computer.
Default: OFF
Enables connecting a Dell USB Type-C Dock to wake the computer from
Standby.
Default: ON
Enables the computer to automatically power on for defined days and times.
Default: Disabled. The system will not automatically power up.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE:
If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF
Enables the computer to run on battery during peak power usage hours.
Default: OFF
Enables to sense the connection of the computer to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN).
Upon disconnection from the wired network, the selected wireless radios are
re-enabled.
Default: OFF
Enables or disables the computer to turn on by a special LAN signal.
Default: Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate
processor performance automatically.
Default: ON
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON
Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
System setup
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

P91f

Table of Contents