Dell XPS 15 9530 Service Manual page 58

Table 6. System setup options—Storage menu
Video
SATA/NVMe Operation
SATA/NVMe Operation
Storge Interface
Port Enablement
Smart Reporting
Enable Smart Reporting
Drive Information
Drive Information
Enable MediaCard
Enable MediaCard
Table 7. System setup options—Security menu
Security
Enable Admin Setup Lockout
Password Bypass
Enable Non-Admin Password Changes
Non-Admin Setup Changes
Enable UEFI Capsule Firmware Updates
Absolute
TPM 2.0 Security On
PPI Bypass for Enable Commands
PPI Bypass for Disable Commands
PPI Bypass for Clear Commands
Attestation Enable
58 System setup
Sets the operating mode of the integrated storage device controller.
Select to enable the devices.
Select to enable the Smart reporting.
Provides the information of the drives installed in the computer.
Select to enable or disable the media card
Enables or disables the user from entering BIOS Setup when an Admin
Password is set.
Default: OFF
Bypass the System (Boot) Password and the internal hard drive password
prompts during a system restart.
Default: Disabled
Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Enables or disables BIOS updates through UEFI capsule update packages.
Default: ON
Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
Default: Enabled
Select whether or not the Trusted Platform Model (TPM) is visible to the OS.
Default: ON
Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user
prompts when issuing TPM PPI enabled and activate commands.
Default: OFF
Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM
PPI Disable and Deactivate commands.
Default: OFF
Enables or disables the operating system to skip BIOS Physical Presence
Interface (PPI) user prompts when issuing the Clear command.
Default: OFF
Enables to control whether the TPM Endorsement Hierarchy is available to the
OS. Disabling this setting restricts the ability to use the TPM for signature
operations.