Instructions for the remote user
Send remote control commands by text message
•
Make sure activation is set to On and that the remote user is saved in the Number
list on the Doro PhoneEasy
•
Text message format must be *#Command#, otherwise the text message cannot
be identified as a remote control command.
•
Always use #-sign to separate and to end parameters (parameters are the content
you want to send).
•
To avoid unintentional removal of contacts from the phonebook: contacts already
in the phonebook, are duplicated (they aren't deleted or replaced).
•
Max length for names is 20 characters, max length for phone numbers is 40 char-
acters and the max length for task descriptions is 35.
Note!
Remote config received is shown briefly on the Doro PhoneEasy
successful reception of remote configurations.
Remotely save a contact in the phonebook
All contacts sent to Doro PhoneEasy
phone (even if storage is set to SIM). 3 phone numbers for each contact can be sent.
Example
Send Jeff Jackson's mobile number, home number and his
office number to Doro PhoneEasy
Write
*#phonebook#Jeff Jackson#
+46700393939#462805011#462805083#
Example
Send Martha Thomson's mobile number to Doro Pho-
neEasy
Write
*#phonebook#Martha Thomson#0768991014#
Remotely set up the assistance button
Objective
Activate the Assistance button function On Normal
Write
*#alert#a#1#
Objective
Activate the Assistance button function On (3)
Write
*#alert#a#2#
Objective
Deactivate the Assistance button function Off
Write
*#alert#a#0#
Objective
Store Jeff Jackson in Number list as position one (1) with
phone number: +46700393939.
Write
*#alert#n#1#Jeff Jackson#+46700393939#
English
®
609.
®
609 by remote configuration are stored in the
®
609.
46
®
609 to confirm
®
609.