Table of Contents
Advertisement
en Installation instructions
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Centre the appliance.
3.
Screw the appliance tightly onto the unit.
4.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
17.11 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.
26
Advertisement
Table of Contents
